What is the pH number for the 6000 CMS™ ambulatory infusion system?
for use with the 6000 CMS™ Ambulatory Infusion System Moog Medical Devices Group tf 800.970.2337 ph 801.264.1001 fx 801.264.1051 www.moog.com/medical Important Safety Note
What are the special features of the 6000 series pump?
Special Features of the 6000 SeriesPump • The Info-On-Demand feature safely provides additional information to the user when the pump is in the “RUN” mode. • Shift Totals that can be greater than 24 hours.
What should I do if an error code occurs during infusion?
If an error code occurs, turn pump off and consult provider or manufacturer. For a full list of alarms and troubleshooting guidance, please see the CURLIN PainSmart User Manual. When ready to resume the infusion, press RUN to start the infusion. Press PAUSE, attach new solution container, highlight REPEAT RX and press YES.
What is patient access and how does it work?
"Patient Access connects you to healthcare services when you need them most. Book GP appointments, order repeat prescriptions and explore your local pharmacy services.".
How do you fix down occlusion?
What Should I Do If My Pump Reads “Down Occlusion”Check clamp on tubing and unclamp if clamped.Check tubing for any kinks or if patient is lying on tubing causing it to occlude.Make sure tubing is placed in pump correctly. ... Try to restart by pressing Pause/Yes to Resume/Run to Start.More items...
How do you program a Curlin 6000 pump?
0:091:437. CURLIN 6000 In-Service: Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt will go through a startup sequence. Once the pump powers up you will see the opening screen thatMoreIt will go through a startup sequence. Once the pump powers up you will see the opening screen that says enter to select program or library if the pump has not been enabled to upload a library.
What are disadvantages of patient portals?
Even though they should improve communication, there are also disadvantages to patient portals....Table of ContentsGetting Patients to Opt-In.Security Concerns.User Confusion.Alienation and Health Disparities.Extra Work for the Provider.Conclusion.
Can I get my ultrasound results online Ontario?
Patients at Niagara Health are among the first in the province who can access their diagnostic records such as an x-ray, CT scan, MRI, or ultrasound through Ontario trusted account, a unique patient digital identity service on the Niagara Health Navigator mobile app.
How do you reprogram a Curlin pump?
0:014:217. CURLIN PainSmart Training: Manual Programming of the PumpYouTubeStart of suggested clipEnd of suggested clipPress the yes Enter key to select in the next menu the pump may have two or three options to chooseMorePress the yes Enter key to select in the next menu the pump may have two or three options to choose from use the down arrow to select new program and press the yes Enter.
How do you set up a Curlin pump?
1:074:49Loading and Priming Tubing for Curlin Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipCenter the tubing in the middle of the pumping fingers push the tubing slightly into the black airMoreCenter the tubing in the middle of the pumping fingers push the tubing slightly into the black air detector slot close the door and latch it securely by pushing down on the bar.
Why do patients not use patient portals?
The researchers found no demographic differences among nonusers who said that a technology hurdle, lack of internet access or no online medical record was the reason why they did not make use of a patient portal.
Can patient portals be hacked?
Unfortunately, what makes your patient portal valuable for patients is exactly what makes it attractive to cybercriminals. It's a one-stop shop for entire health records, and identity thieves can make a fast buck from stealing this data and selling it on.
How do you correct an error in a patient's chart?
When an error is made in a medical record entry, proper error correction procedures must be followed.Draw line through entry (thin pen line). ... Initial and date the entry.State the reason for the error (i.e. in the margin or above the note if room).Document the correct information.
How long does it take to get ultrasound results in Ontario?
You wait for your doctor to call you with the results or to set up an appointment to discuss the results. We do not track this wait, but it's usually less than a week. You can ask the technologist for an estimate before you leave.
Can any doctor access my medical records Ontario?
Under the Personal Health Information Protection Act, you have the right to request access to your own personal health information held by health care providers, called health information custodians, such as doctors, nurses and dentists, and others involved in the delivery of health care services, including pharmacies, ...
Can any doctor access my medical records?
As with all adult medical records, you are only able to access your own records. Even if your partner or parents are on your Doctor Care Anywhere account, you will not be able to view anything unless they choose to share it with you.
How do I increase the rate on my Curlin pump?
0:001:0910. CURLIN PainSmart Training: Changing the Rate or DoseYouTubeStart of suggested clipEnd of suggested clipLet's now assume you want to change one or more of the program settings such as the rate or dose.MoreLet's now assume you want to change one or more of the program settings such as the rate or dose. Press the run pause key to pause the infusion. Press the yes Enter key to confirm resume.
How do you attach a Curlin pump to a pole?
0:120:54Using the Kangaroo™ Connect Pole Clamp - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe latch plate connector to look like an upside-down letter. You match the U on the back of theMoreThe latch plate connector to look like an upside-down letter. You match the U on the back of the pump with the pole clamp latch plate.
How does a CADD pump work?
The CADD®-Solis pump is a pump that runs on a battery to deliver medication(s) that lessens the feelings of pain and other symptoms you may have. The pump is portable and comes in a travel pouch that can be carried over your shoulder or around your waist. This makes it easy for you to move around with the pump.
What are the three standard error messages that may occur during the Start-Up Check process?
This guide reviews remedies for three standard error messages that may occur during the Start-Up Check process: Scanning module error, preventative maintenance error and Archive volume error.
How to contact Carl Zeiss Meditec?
To schedule preventative maintenance service, contact Carl Zeiss Meditec Technical Support at 1-800-341-6968.
How to accept medLMTS?
1. At the medLMTS field, press NO to OFF, then press YES to ON. 2. Enter the upper limits of the infusion rate (the range for this field is 0.1 to 400 mL/hr), then press YES. 3. Press YES to ACCEPT.
How to leave the screen off on a Power CK?
POWER CK: This is the power source with power graph. Press YESto leave the screen off or NO
How often does a KVO pump alarm?
NOTE: If a KVO rate of 0.1 to 10 mL is entered, the pump will give audible alerts every 20 minutes at the end of the infusion. Whereas if zero KVO is entered the pump will alarm every 3 seconds at the end of the infusion. 15. Enter KVO rate (if any), press YES. 16. DOSE/BAG is auto-calculated. Press YES to confirm or NOto change, input desired doses then press
What is a Curlin 6000 pump?
The CURLIN 6000 Ambulatory Infusion Pump by Moog is uniquely designed to bring home healthcare clinicians and pharmacists more precise, accurate, and efficient infusion. With multi-therapy delivery options, a compact size, and built-in safety protocols, the CURLIN 6000 Pump is ideal for the growing home infusion therapy market.
Is Curlin 6000 safe?
Safe: In addition to its reliable performance and built-in safety features, the CURLIN 6000 can be used with the Protocol Library Safety System (PLSS), providing the ability to upload pre-validated drug protocols or patient prescriptions, and eliminating the risk of unintended infusion.
What to do if pump error code?
If an error code occurs, turn pump off and consult provider or manufacturer.
What does ER mean on a pump?
Pump will sound a continuous beep and display will read ER followed by a two digit number or ERR followed by a letter to indicate a self-test has failed. WARNING: If an error occurs (ER01 – ER99 will appear in display), all settings and volume counters should be checked and verified before starting a feeding.
How long does it take for a syringe pump to alarm?
The pump will alarm when left idle for 2 minutes. Press RUN to start the infusion or press OFF to power down the pump.
What are some examples of data entry errors?
Other examples of data entry or selection errors, along with order entry mistakes, are patient data entry errors, wrong-record selections, wrong-route selections for medication administration (e.g., IV instead of intramuscular), and mistakes in the data entry format. Sample scenarios from the event reporting database are described below.
What percentage of events reported to ECRi are health IT?
About 4% of all events reported to ECRI Insti-tute PSO and its partner PSOs are identified as involving health IT (Mardon et al.). PSOs collect event reports about health IT and other patient safety matters using a standardized language and format known as the Common Formats. The Common Formats were developed by the Agency for Healthcare Research and Quality (AHRQ), which oversees federally certified PSOs.
What are the limitations of making improvements to a health IT system?
One of the greatest limitations to making im-provements to a health IT system is not knowing about any incidents that occur, including those that are caught before causing any patient harm. Improvements cannot be made if problems are not identified.
What is the Partnership for Health IT Patient Safety?
The Partnership for Health IT Patient Safety, a private sector initiative, aims to make health IT safer through a collaborative multi-stakeholder effort. Convened by ECRI Institute PSO, the Partnership leverages the work of multiple PSOs, healthcare provider organizations, health IT vendors, an expert advisory panel, and numerous professional societies and organizations to create
Can poor usability affect patient safety?
Poor usability of a health IT system can jeopar-dize patient safety, as suggested by several of the events from the data analysis of events reported to ECRI Institute PSO and its partner PSOs. Users may select the wrong item from a drop-down list, record data in the wrong record, or select the wrong drug for a medication order, to name just a few of the errors that can occur.
How to access Quick Reference Guide?
An online quick reference is provided on the software. To access this guide, press Quick Reference Guide from the log-on screen. You can also access this guide while working on any screen by pressing F1. To exit and return to the cabinet software, press Return on the lower right of the screen.
What to do once a drawer or bin is opened?
Note: Once the drawer or bin has been opened, you may be required to modify the quantity to remove, provide a witness, scan a bar code, or provide a countback.
What is a PMA in a hospital?
The PMA is a method that the system uses to track the amount of medication you have outstanding for a given patient. When you issue an item for a patient, the system automatically creates a PMA in your name for the amount of the item you removed. The PMA remains open until you reconcile the outstanding amount. When the PMA equals zero, it is considered reconciled and closed. The PMA is comprised of three components: unique user (you), unique patient, and unique item (by item ID). If you issue two different items to the same patient, you will have two PMAs open for that patient. Only certain items will require this type of reconciliation, as determined by your facility. Examples may include high-security, high-priority medications. Follow your hospital policy for reconciliation requirements.
What is check item availability?
Check Item Availability is an optional feature that allows you to find other cabinets that stock the selected item. This option is available on cabinets that are enabled for this feature and that are communicating with the OmniCenter over the network. Access the database after an item is selected during the following tasks:
